Fane Sovereign Pro 12BM Fane Sovereign Pro 12BM
TFane Sovereign Pro 12BM TFane Sovereign Pro 12BM

SOVEREIGN PRO 12BM

Sub Bass Driver

Data Sheet
(0 Reviews)  Review this item
£POA
RRP Inc. VAT
AVAILABILITY : OUT OF STOCK

SPECIAL ORDER ONLY. MINIMUM ORDER QUANTITY APPLIES.
Please contact info@fane-international.com for order information.
  • Suitable for horn loaded / bandpass applications producing warm, punchy bass.
  • Ideal for two way ported enclosures when combined with Fane high frequency devices.
  • Strong rigid cone allowing undistorted bass at high SPL.
  • Single roll rubber surround.

The Sovereign Pro 12BM is intended for use in two-way ported enclosures. The driver combined with Fane compression driver and horn offers excellent tonal character throughout its active bandwidth. The unit features die-cast chassis with long throw motor system and high linearity suspension allowing solid bass reproduction at high-power levels. The specially formulated cone pulp allows this driver to give a warm and smooth response throughout the bass frequency range. The Sovereign Pro 12BM is designed for use in 35 to 60 Litre ported enclosures and features a 3 inch voice coil, 500 Watt power handling and 96 dB sensitivity.

 

  • Please enquire about alternative impedances.
  • A.E.S. power handling test. Pink noise bandpass filtered at 12 dB per octave with cutoff frequencies of 45 Hz and 450Hz. Driver mounted in free air, test signal applied at rated power for two hours.
  • Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency performance which may be achieved in a fully optimised system.
Electro Acoustic Specifications
Nominal Chassis Diameter 12" / 304.8 mm
Impedance 8 Ω
Power Handling 500 W (A.E.S.)
Peak Power (6dB Crest Factor) 2000 W (A.E.S.)
Usable Frequency Range (-6dB) 40 Hz - 3.5 kHz
Sensitivity (1W - 1m) Wideband 95 dB
Moving Mass (inc. Air Load) 86 grams
Minimum Impedance (Zmin) 7.3 Ω
Effective Piston Diameter 10" / 254 mm
Magnet Weight 88 oz
Magnetic Gap Depth 0.39" / 9.91 mm
Flux Density 1.15 Tesla
Coil Winding Height 0.73" / 18.54 mm
Voice Coil Diameter 3.0" / 76.2 mm
Speaker Type Sub Bass Driver
Speaker Series The Professional Series
Program Power 1000 W (A.E.S.)
Sensitivity (1W / 1m) Working band
Thiele Small Parameters (TSPs)
FS 41 Hz
Re 3.4 Ω
QMS 1.902
QES 0.231
QTS 0.206
Vas 65.33 Litres
Vd 0.393 Litres
CMS 0.176 mm/N
BL 18 T/m
MMS 85 grams
Xmax 7.7 mm
Sd 510.6 cm2
Efficiency 1.87%
Le 1.89 mH
EBP 177.49 Hz
Materials of Construction
Coil Former Material Glass Fibre
Voice Coil Material Copper
Magnet Material Ferrite
Chassis Material Die-cast Aluminium
Cone Material Paper
Surround / Edge Termination Rubber Roll
Dust Dome Material Paper
Connectors Push-button Spring Terminals
Polarity Positive voltage at red terminal causes forward motion of cone
Mounting / Shipping Information
Overall Diameter 13" / 330.2 mm
Width Across Flats 12.19" / 309.62 mm
Flange Height 0.305" / 7.8 mm
Baffle Hole Diameter F/M 11.03" / 280.16 mm
Baffle Hole Diameter R/M 10.13" / 257.30 mm
Gasket Supplied Front
Outer Fixing Holes 4x ø 0.218" on 12.5" PCD / 4x ø 5.5 mm on 317.5 mm PCD
Inner Fixing Holes Not Applicable
Depth 5.79" / 147.07 mm
Weight 19.18 lb / 8.7 Kg
Recommended Enclosure Volume 30 - 60 Litres
Shipping Weight 20.9 lb / 9.48 Kg
Packing Carton Dimensions (W) 330 (D) 330 (H) 170 mm
DescriptionSizeFormatGet File
Fane Sovereign Pro 12BM Datasheet0.25Mb.pdfDOWNLOAD
Stay connected. Get fresh content from Fane to your email box
SUBSCRIBE
© 2016 Fane International Limited. All rights Reserved. Site developed by Edoru web design Wakefield
PRODUCT COMPARISON
You've reached the maximum comparison limit of four products.
Please choose one of the following options....
VIEW COMPARISIONS