COLOSSUS 15-750BMN

The Colossus 15-750BMN is intended for use in high-power two-way ported enclosures and as a high-output bass, bass/mid driver in multi way systems. It features a 4 inch voice coil immersed in a symmetric magnetic field yielding increased linearity and lower distortion at high excursion levels. The cone membrane, manufactured from polycellulose, is much stronger and more durable than conventional paper pulp alternatives. This allows the driver to combine high-sensitivity with the structural integrity required to produce undistorted low frequencies at high output levels. The driver handles 750 Watts (A.E.S) continuous and can cope with peaks in excess of 300 Watts. This is due to advanced thermal management in the form of vented die-cast chassis and motor system. The Colossus 15-750BMN exhibits an average sensitivity of 100 dB and can deliver bass down to 40 Hz (-6 dB) in a 125 Litre ported enclosure.

• Please enquire about alternative impedances.
• A.E.S. power handling test. Pink noise bandpass filtered at 12 dB per octave with cutoff frequencies of 40 Hz and 400 Hz. Driver mounted in free air, test signal applied at rated power for two hours.
• Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency performance which may be achieved in a fully optimised system.