Fane Sovereign Pro 12-350N Fane Sovereign Pro 12-350N
TFane Sovereign Pro 12-350N TFane Sovereign Pro 12-350N

SOVEREIGN PRO 12-350N

Mid Bass / Mid Range Driver

Data Sheet
(0 Reviews)  Review this item
£POA
RRP Inc. VAT
AVAILABILITY : OUT OF STOCK

SPECIAL ORDER ONLY. MINIMUM ORDER QUANTITY APPLIES.
Please contact info@fane-international.com for order information.
  • Lightweight neodymium magnet assembly.
  • Weighs only 3.7 kg.
  • Ideal for line array applications.
  • UK manufactured cone with optimised pulp offering increased strength, durability and performance.

The Sovereign Pro 12-350N is intended for use as a medium output mid bass driver in ported enclosures and line array systems. The 2.5 inch voice coil is driven by a neodymium non inductive motor system which dramatically reduces third-harmonic and intermodulation distortion. The cone membrane is much stronger and more durable than conventional paper pulps and allows the driver to combine high-sensitivity with the excellent structural integrity required to produce undistorted midband frequency output up to its rated power handling of 350 Watts (A.E.S) continuous, with peak power handling in excess of 1400 Watts. The driver exhibits an average sensitivity of 97.5 dB and is best used in ported enclosures of 25 to 80 Litres.

 

  • Please enquire about alternative impedances.
  • A.E.S. power handling test. Pink noise bandpass filtered at 12 dB per octave with cutoff frequencies of 50 Hz and 500 Hz. Driver mounted in free air, test signal applied at rated power for two hours.
  • Please note that the frequency response measurements are supplied for comparison only and are not a measure of the low frequency performance which may be achieved in a fully optimised system.
Electro Acoustic Specifications
Nominal Chassis Diameter 12" / 304.8 mm
Impedance 8 Ω
Power Handling 350 W (A.E.S.)
Peak Power (6dB Crest Factor) 1400 W (A.E.S.)
Usable Frequency Range (-6dB) 50 Hz - 4.5 kHz
Sensitivity (1W - 1m) Wideband 97.5 dB
Moving Mass (inc. Air Load) 45 grams
Minimum Impedance (Zmin) 6.84Ω
Effective Piston Diameter 10.31" / 261.87 mm
Magnet Weight N/a
Magnetic Gap Depth 0.39" / 10 mm
Flux Density 1 Tesla
Coil Winding Height 0.70" / 18 mm
Voice Coil Diameter 2.5" / 63.5 mm
Speaker Type Mid Bass / Mid Range Driver
Speaker Series The Neodymium Series
Program Power 700 W (A.E.S.)
Sensitivity (1W / 1m) Working band
Thiele Small Parameters (TSPs)
FS 55 Hz
Re 5.75 Ω
QMS 3.9
QES 0.71
QTS 0.6
Vas 77 Litres
Vd 0.24 Litres
CMS 0.186 mm/N
BL 11.5 T/m
MMS 45 grams
Xmax 4.5 mm
Sd 540 cm2
Efficiency 1.89%
Le 1.64 mH
EBP 77.46 Hz
Materials of Construction
Coil Former Material Glass Fibre
Voice Coil Material Aluminium - Inside/ Outside Windings
Magnet Material Neodymium
Chassis Material Die-cast Aluminium
Cone Material Curvilinear Paper
Surround / Edge Termination Polyvinyl Damped Dbl. Half Roll P/C
Dust Dome Material Solid Paper
Connectors Push-button Spring Terminals
Polarity Positive voltage at red terminal causes forward motion of cone
Mounting / Shipping Information
Overall Diameter 13" / 330.2 mm
Width Across Flats 12.19" / 309.62 mm
Flange Height 0.305" / 7.8 mm
Baffle Hole Diameter F/M 11.03" / 280.16 mm
Baffle Hole Diameter R/M 10.13" / 257.30 mm
Gasket Supplied Front & Rear
Outer Fixing Holes 4x ø 0.218" on 12.5" PCD / 4x ø 5.5 mm on 317.5 mm PCD
Inner Fixing Holes Not Applicable
Depth 5.35" / 136 mm
Weight 8.15 lb / 3.7 Kg
Recommended Enclosure Volume 0.88 - 2.83 cu ft / 25 - 80 Litres
Shipping Weight 9.4 lb / 4.26 Kg
Packing Carton Dimensions (W) 330 (D) 330 (H) 170 mm
DescriptionSizeFormatGet File
Fane Sovereign Pro 12-350N Datasheet0.30Mb.pdfDOWNLOAD
Stay connected. Get fresh content from Fane to your email box
SUBSCRIBE
© 2016 Fane International Limited. All rights Reserved. Site developed by Edoru web design Wakefield
PRODUCT COMPARISON
You've reached the maximum comparison limit of four products.
Please choose one of the following options....
VIEW COMPARISIONS